MANTRA L1 Fingerprint Scanner MFS110

MFS110 is an elegant L1 fingerprint device used for identification, verification & authentication
processes of an individual. MFS110 offers secured biometrics data, error-free and
reliable identification based on unique fingerprint biometric technology. It is fast &
easy-to-use. It can be used as an alternative or a complement to those hard-to-remember
passwords.

Android App : https://play.google.com/store/apps/details?id=com.mantra.mfs110.rdservice&pli=1

For Desktop : https://www.mantratec.com/Download/

MFS110 is a high-quality USB optical fingerprint
sensor. Hard optical sensor is resistant to scratches,
impact, vibration, & electrostatic shock. MFS110
can be used for authentication, identification &
verification functions. Congratulations on
purchasing MFS110, Which is designed specially to
provide high-level biometric security for desktops
as well as complex network environments.
Introduction Position of Finger
Finger Height :
Finger Angle :
Align center of 1st phalanx with sensor center
The finger must be parallel to sensor sides
Finger Inclination : Finger must be parallel to the sensor surface
Finger Rotation : Finger must be parallel to the sensor surface
Warranty Terms
6. Maximum Liability of company under or in connection with the product, for
any reason and on any basis whatsoever, is limited to fifty percent (50 %) of the
total amount of the product.
7. In the event of repairs of any part/s of the unit, this warranty will thereafter
continue and remain in force only for the unexpired period of the warranty. The
period for repair and in transit whether under the warranty or otherwise shall not
be excluded from the warranty period.
5. The company shall not be liable for any direct, indirect or consequential loss,
damage, cost or expense of any kind, whether arising from tort, breach of
contract or howsoever, including without limitation loss of profits or of contracts,
loss of operation time and loss of goodwill or anticipated savings.
8. In case of any damage to the product/misuse detected by the authorized
service center personnel, the warranty conditions are not applicable and repairs
will be done subject to availability of parts and on a chargeable basis only.
9. In the event of any unforeseen circumstance, and spares not being available,
the company’s prevailing depreciation rules will be binding on the purchaser to
accept as a commercial solution in lieu of repairs.
10. The warranty does not cover the cost of transportation of the system from the
place of installation to the Service Center.
2. Repairs under warranty period shall be carried out by the company authorized
personnel only. The details of service centers/support required are available at
the company website www.mantratec.com/Support or in the centralized
helpline (+917949068000 – EXT: 1).
4. The company does not undertake responsibility for the quality of software
being used by the purchaser.
1. The warranty is confined to the first purchaser of the product only and is not
transferable.
3. Tenure of Warranty and process for claiming warranty shall be as per the
original Tax Invoice of the company.
Rights and Obligations : User guarantees that the product will not be used in
any way that violates the law or legal rights of any third party (including but not
limited to Intellectual Property Rights, privacy rights, and portrait rights). In case
of violation, the user shall bear the legal liabilities and other responsibilities
arising therefrom.
Operating & Handling Instructions
u Disconnect the sensor from your desktop when not operating.
u Operate the sensor within the operating limits specified.
u Use only the USB cable provided & don’t attempt to replace it.
u Handle the sensor with proper care to avoid damage of the sensor.
u Clean the glass portion (Platen Area) of the sensor with the cleaning cloths
to avoid latent fingerprint detection or rejection.
u Store the sensor in a cool & dry place when not in use.
u If the sensor does not work make sure the sensor is detected as “Mantra
fingerprint : MFS110” in the device manager of PC. If the sensor is not
detected, please re-install the drivers for proper functioning of the
sensor. In case of further problem please contact technical support
person for assistance.
u In windows, Driver must be installed before using your USB Fingerprint
sensor, a Driver is automatically detected when you plug the sensor into
the USB port of your PC.
u Finger must be parallel to sensor surface.
Any damage to the device caused by these activities will void the warranty.

MANTRA MFS110 REGISTERED DEVICE SERVICE
>> WINDOWS

MANTRA SOFTECH INDIA PVT LTD
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 2
TABLE OF CONTENTS
1. Mantra MFS110 Driver Setup Installation. …………………………………………………………………………………………………3
2. Mantra MFS110 RD Service Installation. ……………………………………………………………………………………………………4
5. L1 Registered Device (MFS110 Registered Device)……………………………………………………………………………………..7
6. RD Service Test Application ……………………………………………………………………………………………………………………..8
7. Proxy Setting ………………………………………………………………………………………………………………………………………..10
8. Browser Configuration for Web RD Test………………………………………………………………………………………………….11
9. Device Registration on Management Server …………………………………………………………………………………………… 13
10. Technical Support ……………………………………………………………………………………………………………………………….13
11. Dev Support ………………………………………………………………………………………………………………………………………13
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 3
1. Mantra MFS110 Driver Setup Installation.
1. Start installation:
Right click on setup file and select “Run as administrator”.
Note: To install MFS110 scanner drivers and necessary service, setup need to access system32
folder. In this case setup need administrator privileges.
2. Welcome Wizard and Destination Location:
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 4
3. Finish Driver Installation
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 5
2. Mantra MFS110 RD Service Installation.
1. Start installation:
 Right click on setup file and select “Run as administrator”.
 Note: To install Mantra MFS110 RD Service, setup needs administrator privileges.
2. Welcome Wizard:
3. Destination Location:
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 6
4. Finish RD Service Installation:
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 7
 After installation of RD Service, it can be found under Services form “Control Panel\All Control
Panel Items\Administrative Tools”.
5. L1 Registered Device (MFS110 Registered Device)
 When RD Service will detect device then it will convert it into registered device and user will be notified
with success response by RD Service.
 After that you need to unplug and plug your device.
 If your device is not listed at Mantra Management Server than user will be notified with below message
so in this case you need to contact with our Servico Team at http://servico.mantratecapp.com Or
+91-79-49068000.
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 8
 Once registered MFS110 device will be plugged to the system, RD service will detect it automatically and
validate it on Mantra’s Management Server.
 Once validation competed then it will generate below popup for user information.
6. RD Service Test Application
1) HTTP : http://rdtest.aadhaardevice.com/
2) HTTPS : https://rdtest.aadhaardevice.com/ (Test in https URL if your website is in https)
 By running RD Service Test application, user can detect Mantra RD Services installed in the
system.
 User can get Device Information which is connected to its system.
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 9
 By calling capture function of RD service, user can capture biometric data.
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 10
Mantra Management Server
 It is necessary that RD service installed in client machine must interact with Mantra’s
Management Server.
 For that, client machine must access the domain https://aadhaardevice.com and it’s all subdomains.
7. Proxy Setting
Proxy in Network (if proxy is required to connect internet)
 After installation of RD Service below Application – Config Mantra MFS110 RDService
shortcut will be available on ‘desktop’ as well as in ‘All Programs’.
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 11
 Enter Username and Password if Proxy Authentication is required otherwise keep as
Blank.
 On “OK” Message of Test Proxy, click on Save Proxy.
 You need to “Unplug and Plug” device so RD Service will take that proxy setting to
communicate “Mantra Management Server”.
8. Browser Configuration for Web RD Test
Note: Only incase you are using the https://rdtest.aadhaardevice.com/ link otherwise skip this
step.
1) Chrome
Optional: To request on HTTP → Change flag → ‘Block insecure private network requests’
on web browser from ‘chrome://flags/#block-insecure-private-network-requests’ URL
address. → Change flag to DISABLED status.
https://127.0.0.1:11100 (Port will be from 11100 to 11120)
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 12
2) Firefox
Optional: To request on HTTP → Change flag – ‘Block insecure private network requests’ on
web browser from ‘about:config’ → ‘network.websocket.allowInsecureFromHTTPS’ URL
address. → Change flag to TRUE status.
https://127.0.0.1:11100 (Port will be from 11100 to 11120)
MANTRA MFS110 REGISTERED DEVICE SERVICE
MANTRA REGISTERED DEVICE SERVICE API 1.0 13
9. Device Registration on Management Server
To list device pre-production or production, send serial number of device to
servico@mantratec.com
079-49068000(Ex-1)
10. Technical Support
Mantra Support Team
079-49068000(Ex-1)
servico@mantratec.com
This information can be shared with your clients or end user for any kind of technical support.
11. Dev Support
Mantra Support Team
devsupport@mantratec.com
This information can be shared with your clients or end user for any kind of technical support.

error: Content is protected !!

Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/newapexw/public_html/wp-includes/functions.php on line 5420